tel  +39 011 220 31 20  fax  +39 011 220 32 12

COMPLIANCE STATEMENT                           to EEC Low Voltage Directive 73/23 (EN 61058-1 standard) We list below the data required by table 2 of the standard above.      Further data are specified in the catalogue.

Table's	Matter	Assigned value
head
1.	IDENTIFICATION
	- manufacturer's name	PALAZZO Componenti Elettronici
	- model	10R111NS   10R206NS   10R304NS   10R403NS
		10R111S     10R206S     10R304S      10R403S
2.	SWITCHING ENVIRONMENT,  USING
	- protection level against	Protect the component from electrical contacts
	external electric shock.	during assembling operations.
		This product is suitable for class 1 sets
		provided with ground connection.
2.3	MOUNTING SYSTEMS	Fitting to the front panel by exagonal nut and/or
		by soldering on the printed circuit board.
3.	TEMPERATURE	operating range: -20 +80°C
4.	ELECTRIC LOAD	Current breaking capacity(resistive load):
		200mA 250Vac  -  300mA 110Vac   -  400mA 30Vdc
5.	CONNECTIONS
	- type of admitted conductors	Rigid conductors (PCB tracks) minimum section 0,015mm˛
	- soldering systems	Manual or machinery processing.
		The switch must be protect from contact
		with soldering flush and from the following washing.
6.	OPERATING CYCLES / SEQUENCY	100.000
8.	CIRCUIT BREAKING	Limited breaking
9.	INSULATORS TRACKING INDEX (PTI)	425
	- heat and fire resistance class	650° white-hot thread test on insulating parts
		that holds contacts under voltage.

The test report TO397 dated 13/03/97 was issued by CESVIT-CETACE, SIT 56 center. This laboratory was licenced for Low Voltage Directive tests, by a Decree dated 20/05/94 signed by te Italian Ministry of Industry. The laboratory works togheter with the Department of Electronics at the University of Florence. The complete test report is available on Customers' demand.